Electroplated Diamond/ CBN Grinding Wheels
|Electroplated Diamond/ CBN Tools|
|Grit: 30#-1200# (D711-D15)|
|Type: 1A1,1V1,1A1R,6A2,6A9,3A1,9A1,11V9,12A2 etc|
|Lead Time: 5 ~ 12 Days|
|Payment Terms: T/T, Western Union, MoneyGram, PayPal,etc|
If you need any products, do not hesitate to contact
|Various shapes and sizes of grinding wheels for profile forming or
surface grinding of marble and other hard materials. No matter
straight or profile forms.|
common used spect:
|Plane grinding wheel||50~400||36#~2000|
|Irregular grinding wheel||Less than 400||36#~2000|
|Electroplated grinding dot||0.15~50||36#~2000|
The electroplated grinding wheels have characteristics of high
grain density ,sharp grinding ,high efficiency, good precision
,without dressing etc. The product can be made with various shapes
and they other form grinding which have strict requirement on
geometry and a lot of tools which are difficult to process with
other methods can be solved here .are suitable for special
complicated profile , super-thin ,especially small and other form
grinding which have strict requirement on geometry shape and
dimension ,Therefore it improves the process efficiency and a lot
of tools which are difficult to process with other methods can be
solved here .
Characteristics of Electroplated Diamond /CBN grinding wheel :
- The ability to manufacture tight-tolerance forms.
- Lower initial cost, compared to vitrified, resin and metal bonded
- Freer cutting, resulting in higher material removal rates, less
power required and reduced thermal damage to the workpiece.
- The ability to hold form or profile from first to last cut.
- Elimination of time associated with dressing.
- The ability to strip and replate the core.
THE CASES OF ELECTROPLATED DIAMOND GRINDING WHEELS:
1.Electroplated CBN grinding wheel D200*H31.84*T25.4
2.Electroplated diamond grinding wheel for Stone.
3. Electroplated CBN small grinding wheel for machining harmonica